The following are references used in completing the research and design for this senior thesis:
2009 ASHRAE Handbook of Fundamentals.
Mechanical Construction Documents.
Architectural Construction Documents.
2007 ASHRAE Handbook-HVAC Applications.
Halton – Chilled Beam Design Guide
“Chilled Beams in Laboratories: Key Strategies to Ensure Effective Design, Construction, and Operation”. Laboratories for the 21st Century: Best Practice Guide. June 2009.
McQuay. Geothermal Heat Pump Design Manual. 2002.
ASHRAE, 2007, ANSI/ASHRAE, Standard 62.1‐2007, Ventilation for Acceptable Indoor Air Quality. American Society of Heating, Refrigerating, and Air Conditioning Engineers, Inc. Atlanta, GA. 2007.
ASHRAE, 2007, ANSI/ASHRAE, Standard 90.1‐2007, Energy Standard for Buildings Except Low‐Rise Residential Buildings. American Society of Heating, Refrigerating, and Air Conditioning Engineers, Inc. Atlanta, GA. 2007.
Source Energy and Emission Factors for Energy Use in Buildings, M. Deru and P. Torcellini (2007)
Council, U.S. (2009). LEED 2009 for New Construction and Major Renovations. Washington, D.C: United States Green Building Council, Inc.
Roth, Kurt, Ph.D; and Brodrick, James, Ph.D. “Seasonal Energy Storage”. ASHRAE Journal vol. 51 (January 2009): p. 41-43.
Weale, John, P.E.; and Rumsey, Peter, P.E. “Chilled Beams in Labs: Eliminating Reheat & Saving Energy on a Budget”. ASHRAE Journal vol. 49 (January 2007): p. 18-23.
Kavanaugh, PhD, Steve. “Ground Source Heat Pumps for Commercial
Buildings.” September 2008. HPAC Engineering. 8 Dec. 2009
< http://hpac.com >
“Commercial Geothermal Heat Pumps”. http://www.energy.wsu.edu/Documents/geo_heat_pumps.pdf
Kavanaugh, PhD, Steve. “Ground Source Heat Pumps.” ASHRAE Journal vol. 40 (October 1998): p. 31-36. |