User Note:

Note: While great efforts have been taken to provide accurate and complete information on the pages of CPEP, please be aware that the information contained herewith is considered a work-in-progress for this thesis project. Modifications and changes related to the original building designs and construction methodologies for this senior thesis project are solely the interpretation of Sam Jannotti. Changes and discrepancies in no way imply that the original design contained errors or was flawed. Differing assumptions, code references, requirements, and methodologies have been incorporated into this thesis project; therefore, investigation results may vary from the original design.

 
 

 
 
Thesis Research:

The following resources were used to aid in the completion of Sam Jannotti's Senior Thesis.

Architects, T. A. (2007). Architectural Graphic Standars, Eleventh Edition. John Wiley &
Sons, Inc.

United Steel Deck, I. (2003). Steel Decks for Floors and Roofs. Nicholas J. Bouras, Inc.

Winter, R., & Gebhard, R. (1973, Updated 1985). A Guide to Architecture in San
Francisco and Northern California. Layton, Utah: Gibbs M. Smith Inc./Peregrine Smith Books

American Institute of Steel Construction, Seismic Provisions for Structural Steel Buildings (ANSI/AISC 341-05), March 2005

Roy Becker and Michael Ishler, Seismic Design Practice For Eccentrically Braced Frames, Steel Tips, December 1996

 
 
 
Extracurricular News
 
 
           

 

Senior Thesis | The Pennsylvania State University | Architectural Engineering | AE Lab | Envisioneers | Contact Sam |
This Page was last updated on May 9, 2008, By Sam Jannotti and is hosted by the AE Department ©2008