Heather Stapel

____________________________________

Mechanical Building Systems
Eberly Campus Community Center
Uniontown, PA

This is a student-generated Capstone Project e-Portfolio (CPEP) produced in conjunction with the AE Senior Thesis e-Studio.

AE Senior Thesis 2007

- Capstone Design Project E-Portfolio -

_________________________________________________________

Thesis Research

 

Works Cited / Tools Used:

Ahmed, M.H., Fouad, M., Kattab, N.M. “Evaluation and Optimization of Solar Desiccant Wheel Performance.” Renewable Energy Journal. Volume 30, Issue 3, March 2005. p. 305 – 325. http://www.sciencedirect.com.

ASHRAE Handbook: Fundamentals. The American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Inc. Atlanta, GA. 2005.

Balboni, Barbara, Editor. Interior Cost Data. RSMeans. Construction Publishers & Consultants. Kingston, MA. 2006.

Burnett, E., Straube, J. Building Science for Building Enclosures. Building Science Press. Westford, MA. 2005.

Cengel, Y., Cimbala, J. Fluid Mechanics: Fundamentals and Applications. McGraw Hill Higher Education. New York, NY. 2006.

“Chemical Composition of Natural Gas.” Union Gas Company. April 4, 2007. http://www.uniongas.com/aboutus/aboutng/composition.asp

DesignBuilder: Energy Plus Front End

Egan, David M. Architectural Acoustics. McGraw-Hill Companies, Inc. New York, NY. 1988.

EES Equation Solver Software

“Environmental Performance” Allegheny Energy. April 4, 2007. http://www.alleghenyenergy.com/Environment/EnvironmentalPerformance.asp

“Green Building Rating System for Existing Buildings: Upgrades, Operations, and Maintenance.” The U.S. Green Building Council. July 2005. http://www.usgbc.org/ShowFile.aspx?DocumentID=913

Hughes, David S. Electrical Systems in Buildings. Delmar Publishers Inc. Albany, NY. 1988.

Manual of Steel Construction: Load Resistance Factor Design. American Institute of Steel Construction, Inc. New York, NY. 2005.

Matthys, John. Editor. Masonry Designers’ Guide. The Masonry Society. Boulder, CO. 2001.

McQuiston, Parker, Spitler. Heating, Ventilation, and Air Conditioning: Analysis and Design. John Wiley & Sons, Inc. Hoboken, NJ. 2005.

Moffitt, Ronnie. “Taking the Heat out of Desiccants.” HPAC Engineering. Issued March 2007. http://www.hpac.com/ArticleDraw.aspx?CID=45938&HBC=Issue&OAS=&NIL=False

“Mold Resources.” The Environmental Protection Agency. March, 2007. http://www.epa.gov/mold/moldresources.html

Mossman, Melville, Editor. Mechanical Cost Data. RSMeans. Construction Publishers & Consultants. Kingston, MA. 2006.

NEC 2005: NFPA 70: National Electric Code. National Fire Protection Assocation. Salt Lake City, UT. 2005.

Ozdeniz, M., Yilmazer, S. “The Effect of Moisture Content on Sound Absorption of Expanded Perlite Plates.” Building and Environment Journal. Volume 40, Issue 3, March 2005. p. 311-318. http://www.sciencedirect.com.

Radermacher, Xuan. “Transient Simulation for Desiccant and Energy Wheels.” Center for Environmental Energy Engineering, University of Maryland. College Park, MD. June 24, 2005.

Trane TRACE Program

Waier, Phillip, Editor. Building Construction Cost Data. RSMeans. Construction Publishers & Consultants. Kingston, MA. 2005.

Weber, Richard. “Masonry Wall Systems.” Whole Building Design Guide. Jan., 2007. http://www.wbdg.org/design/env_wall_masonry.php

 

Senior Thesis | The Pennsylvania State University | Architectural Engineering | AE Lab | |
This Page was last updated on June 21, 2007 , By Heather Stapel and is hosted by the AE Department ©2005