Technical Assignments
Proposal
The following proposal describes the four spaces in the Student Resouce Building that I will be focusing my redesign work towards.
Technical Assignment 1
The following report is an analysis of the currently proposed lighting system in each of the four spaces as defined in the "Lighting Proposal Memo". The report will be include a discussion of design criteria as proposed by the IESNA Lighting Handbook in addition to an analysis of the existing lighting conditions based on calculations performed using AGI32.
The addendum below is an analysis of the existing daylight conditions in the four spaces. Again AGI32 was used to perform calculations.
Lighting Existing Conditions and Design Criteria Report
Addendum: Existing Conditions Daylight Analysis
Technical Assignment 2
The following report is a discussion of the exisiting electrical system in this building. All electrical loads were determined in reference to the 2005 National Electric Code.
Electrical Systems Existing Conditions and Building Load Summary Report
Technical Assignment 3
The following report is the schmatic lighting design proposal for the Student Resource Building. The goal was to utilize light as a means to acheieve a visually interesting space for people to convene and socialize, an idea that is reminiscent of the piazzas of old. The designs were presented to a panel of lighting designers at Lutron on December 15th 2006.
Schematic Design Report (MS Powerpoint)