Steven Puchek - Cathedral Place - Technical Assignments

web stats

Technical Assignments

Proposal

Lighting Proposal

Technical Assignment 1 - Existing Lighting Conditions and Design Criteria

Executive Summary - (27 KB)

Tech 1 - (4.7 MB)

Technical Assignment 2 - Existing Electrical System and Load Analysis

Executive Summary - (20 KB)

Tech 2 - (294 KB)

Tech 2 with Supplemental - (w/ Riser, Single Line, and Motor Schedule) - (1.2 MB)

Technical Assignment 3 - Lighting Schematic Design Phase and Presentation to Lutron

Executive Summary - (33 KB)

Tech 3 - as presented at Lutron - (20.7 MB)

Comments from Lutron - (52 KB)

User Note:

Note: While great efforts have been taken to provide accurate and complete information on the pages of CPEP, please be aware that the information contained herewith is considered a work-in-progress for this thesis project. Modifications and changes related to the original building designs and construction methodologies for this senior thesis project are solely the interpretation of Steven Puchek. Changes and discrepancies in no way imply that the original design contained errors or was flawed. Differing assumptions, code references, requirements, and methodologies have been incorporated into this thesis project; therefore, investigation results may vary from the original design.

Senior Thesis Home | The Pennsylvania State University | Architectural Engineering | AE Computer Lab | |
This page was last updated on December 11, 2005 , By Steven Puchek and is hosted by the AE Department ©2005